USB 0: host mode USB 1: host mode PCI 0: PCI Express Root Complex Interface PCI 1: Conventional PCI, speed = 33000000 Net: egiga0 [PRIME] Using 88E1118 phy hit any key to switch tftp boot. Hit any key to stop autoboot: 2 0 switched to TFTP boot. <> <> Hit any key to stop autoboot: 3 2 1 0 Using egiga0 device TFTP from server 192.168.11.1; our IP address is 192.168.11.150 Filename 'uImage.buffalo'. Load address: 0x100000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################# done Bytes transferred = 1809460 (1b9c34 hex) Using egiga0 device TFTP from server 192.168.11.1; our IP address is 192.168.11.150 Filename 'initrd.buffalo'. Load address: 0x2000000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################ done Bytes transferred = 4882988 (4a822c hex) <> ## Booting image at 00100000 ... Image Name: Linux-2.6.16.16-arm1 Created: 2008-05-20 1:02:00 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1809396 Bytes = 1.7 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK ## Loading Ramdisk Image at 02000000 ... Image Name: initrd Created: 2009-01-22 0:15:02 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 4882924 Bytes = 4.7 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Starting kernel ... arg:console=ttyS0,115200 root=/dev/sda2 rw panic=5 rw initrd=0x02000040,20M panic=5 BOOTVER=1.091 CONFIG_BUFFALO_PLATFORM CONFIG_BUFFALO_LINKSTATION_LSGL --- Uncompressing Linux........................................ ........................................................... .................. done, booting the kernel. Linux version 2.6.16.16-arm1 (root@I.You) (gcc version 3.4.4 (release) (CodeSourcery ARM 2005q3-2)) #37 Tue May 20 10:01:57 JST 2008 CPU: ARM926EJ-Sid(wb) [41069260] revision 0 (ARMv5TEJ) Machine: MV-88fxx81 Using UBoot passing parameters structure Sys Clk = 250000000, Tclk = 166664740 - Warning - This LSP release was tested only with U-Boot release 1.7.3 Memory policy: ECC disabled, Data cache writeback CPU0: D VIVT write-back cache CPU0: I cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets CPU0: D cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets Built 1 zonelists Kernel command line: console=ttyS0,115200 root=/dev/sda2 rw panic=5 rw initrd=0x02000040,20M panic=5 BOOTVER=1.091 PID hash table entries: 1024 (order: 10, 16384 bytes) Console: colour dummy device 80x30 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 128MB 0MB 0MB 0MB = 128MB total Memory: 105428KB available (3169K code, 460K data, 108K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 20480K NET: Registered protocol family 16 FLASH boardId = 12 Flash bankwidth 1, base ff800000, size 400000 BUFFALO LS_GL FLASH size 4096[KB] <<====なぜかBUFFALO? Marvell Development Board (LSP Version 1.7.8_NAS)-- BUFFALO_BOARD_LS_GL Detected Tclk 166664740 and SysClk 250000000 Marvell USB EHCI Host controller #0: c33f5e00 Marvell USB EHCI Host controller #1: c33f5c00 pexBarOverlapDetect: winNum 2 overlap current 0 mvPexInit:Warning :Bar 2 size is illigal <<<<======ここはこれでいいらしい it will be disabled please check Pex and CPU windows configuration PCI: bus0: Fast back to back transfers enabled PCI: bus1: Fast back to back transfers enabled SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub use IDMA acceleration in copy to/from user buffers. used channels 2 and 3 Done. cesadev_init(c0011314) mvCesaInit: sessions=640, queue=32, pSram=f0000000 Fast Floating Point Emulator V0.9 (c) Peter Teichmann. SGI XFS with large block numbers, no debug enabled Initializing Cryptographic API io scheduler noop registered (default) io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at MMIO 0x0 (irq = 3) is a 16550A serial8250: ttyS1 at MMIO 0x0 (irq = 4) is a 16550A RAMDISK driver initialized: 3 RAM disks of 16384K size 1024 blocksize loop: loaded (max 8 devices) Marvell Gigabit Ethernet Driver 'egiga': o Ethernet descriptors in DRAM o DRAM SW cache-coherency o Checksum offload enabled o Loading network interface ** egiga_init_module (0) 'eth0' Intergrated Sata device found scsi0 : Marvell SCSI to SATA adapter scsi1 : Marvell SCSI to SATA adapter ** BUFFALO Disable Command Queuing Function [0 0] ** Vendor: Maxtor Model: 6Y160M0 Rev: YAR5 Type: Direct-Access ANSI SCSI revision: 03 Linux IAL (ERROR) : retry command host=0, bus=0 SCpnt = c327eba0 SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: Write Protect is off SCSI device sda: drive cache: write back SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: Write Protect is off SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 < sda5 sda6 > sd 0:0:0:0: Attached scsi disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 physmap flash device: 400000 at ff800000 >jedec_probe Found: SST 39LF020 phys_mapped_flash: Found 1 x8 devices at 0x0 in 8-bit bank number of JEDEC chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. cmdlinepart partition parsing not available RedBoot partition parsing not available ehci_platform ehci_platform.4523: EHCI Platform Host Controller ehci_platform ehci_platform.4523: new USB bus registered, assigned bus number 1 ehci_platform ehci_platform.4523: irq 17, io mem 0x00000000 ehci_platform ehci_platform.4523: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected ehci_platform ehci_platform.16781: EHCI Platform Host Controller ehci_platform ehci_platform.16781: new USB bus registered, assigned bus number 2 ehci_platform ehci_platform.16781: irq 12, io mem 0x00000000 ehci_platform ehci_platform.16781: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected USB Universal Host Controller Interface driver v2.3 Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice Kernel event proc (C) BUFFALO INC. V.1.00 installed. MICON ctrl (C) BUFFALO INC. V.1.00 installed. MICON V2 (C) BUFFALO INC. V.1.00 installed. NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 3, 32768 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). ---- in linuxrc --- Thu Jan 22 09:33:14 JST 2009 err: >AnalyzeRecvPacket:This is invalid RespCode.(code=244) CheckDevices linuxrc:choose operation (timeout 4[s]) 1:RamRoot other:HddRoot ? -HddRoot- kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. XFS mounting filesystem sda2 PRODUCTID=0x00000009 PRODUCTID=0x00000009 KERNEL:2008/5/20 10:1:54 HDD:2008/5/20 10:2:41 KERNEL:2008/5/20 10:2:20 HDD:2008/5/20 10:2:41 -- CopyFromInitrdToHdd -- cp: /etc/init.d/pwrmgr.sh: No such file or directory <<<========= == fsck_disks == e2fsck 1.27 (8-Mar-2002) Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information /dev/ls_disk1_1: 37/74296 files (21.6% non-contiguous), 64347/297171 blocks 4+0 records in 4+0 records out XFS mounting filesystem sda2 Phase 1 - find and verify superblock... Phase 2 - using internal log - zero log... - scan filesystem freespace and inode maps... - found root inode chunk Phase 3 - for each AG... - scan and clear agi unlinked lists... - process known inodes and perform inode discovery... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - agno = 4 - agno = 5 - agno = 6 - agno = 7 - agno = 8 - agno = 9 - agno = 10 - agno = 11 - agno = 12 - agno = 13 - agno = 14 - agno = 15 - agno = 16 - agno = 17 - agno = 18 - agno = 19 - agno = 20 - agno = 21 - agno = 22 - agno = 23 - agno = 24 - agno = 25 - agno = 26 - agno = 27 - process newly discovered inodes... Phase 4 - check for duplicate blocks... - setting up duplicate extent list... - clear lost+found (if it exists) ... - clearing existing "lost+found" inode - marking entry "lost+found" to be deleted - check for inodes claiming duplicate blocks... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - agno = 4 - agno = 5 - agno = 6 - agno = 7 - agno = 8 - agno = 9 - agno = 10 - agno = 11 - agno = 12 - agno = 13 - agno = 14 - agno = 15 - agno = 16 - agno = 17 - agno = 18 - agno = 19 - agno = 20 - agno = 21 - agno = 22 - agno = 23 - agno = 24 - agno = 25 - agno = 26 - agno = 27 Phase 5 - rebuild AG headers and trees... - reset superblock... Phase 6 - check inode connectivity... - resetting contents of realtime bitmap and summary inodes - ensuring existence of lost+found directory - traversing filesystem starting at / ... rebuilding directory inode 128 - traversal finished ... - traversing all unattached subtrees ... - traversals finished ... - moving disconnected inodes to lost+found ... Phase 7 - verify and correct link counts... done proc /proc proc rw 0 0 sysfs /sys sysfs rw 0 0 XFS mounting filesystem sda2 VFS: Mounted root (xfs filesystem). Trying to move old root to /initrd ... /initrd does not exist. Ignored. <<==== Unmounting old root Trying to free ramdisk memory ... okay Freeing init memory: 108K INIT: version 2.86 booting kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. XFS mounting filesystem sda6 mount: /proc/bus/usb/ already mounted or /proc/bus/usb/ busy <<====== mount: /dev/pts already mounted or /dev/pts busy <<====== mount: according to mtab, devpts is already mounted on /dev/pts <<====== mkdir: cannot create directory `/var/lock': File exists <<====== chown: `rpcuser.rpcuser': invalid user <<====== rm: cannot remove `/var/lock/apache2': Is a directory <<====== rm: cannot remove `/var/lock/perfmon': Is a directory <<====== rm: cannot remove `/var/lock/printing': Is a directory <<====== rm: cannot remove `/var/lock/subsys': Is a directory <<====== swapon: cannot stat /dev/ls_disk1_5: No such file or directory <<====== create dir : /var/spool/lpd create dir : /var/spool/news create dir : /var/spool/uucp create dir : /var/list create dir : /var/run/ircd create dir : /var/lib/gnats create dir : /nonexistent chown: `nobody.nobody': invalid user <<====== create dir : /home/ntp create dir : /var/run/sshd chown: `sshd.sshd': invalid user <<====== create dir : /var/run/proftpd chown: `proftpd.proftpd': invalid user <<====== create dir : /var/run/dbus Setting the system clock.. Cleaning up ifupdown.... Loading kernel modules...done. Loading device-mapper support. Checking file systems...fsck 1.40-WIP (14-Nov-2006) /dev/sda1 is mounted. e2fsck: Cannot continue, aborting. <<======== /sbin/fsck.xfs: XFS file system. fsck died with exit status 8 <<============ failed (code 8). * File system check failed. <<======== A log is being saved in /var/log/fsck/checkfs if that location is writable. Please repair the file system manually. * A maintenance shell will now be started. CONTROL-D will terminate this shell and resume system boot. Press enter for maintenance (or type Control-D to continue): <<=====ここで↑Ｄを打った ... done. Mounting local filesystems...done. Activating swapfile swap...Adding 1004020k swap on /dev/sda5. Priority:-1 extents:1 across:1004020k done. Setting up networking.... Configuring network interfaces...Internet Systems Consortium DHCP Client V3.0.4 Copyright 2004-2006 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ eth0: link down Listening on LPF/eth0/00:16:01:a4:c2:d6 Sending on LPF/eth0/00:16:01:a4:c2:d6 Sending on Socket/fallback eth0: link up<5>, full duplex<5>, speed 1 Gbps<5> DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 DHCPOFFER from 192.168.254.254 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPACK from 192.168.254.254 bound to 192.168.0.27 -- renewal in 250 seconds. if-up.d/mountnfs[eth0]: lock /var/run/network/mountnfs exist, not mounting done. Starting portmap daemon.... Loading the saved-state of the serial devices... /dev/ttyS0 at 0x0000 (irq = 3) is a 16550A /dev/ttyS1 at 0x0000 (irq = 4) is a 16550A /etc/rcS.d/S55bootmisc.sh: line 28: /var/run/utmp: No such file or directory INIT: Entering runlevel: 2 Starting system log daemon: syslogd <<=====ここで出力が止まった。しかたないのでパワーボタンで強制停止する。 . Starting kernel log daemon: klogd. Starting domain name service...: bindmkdir: cannot create directory `/var/run': File exists chmod: cannot access `/var/run/bind/run': No such file or directory failed! Starting portmap daemon...Already running.. Starting Common Unix Printing System: cupsdmkdir: cannot create directory `/var/run': File exists mkdir: cannot create directory `/var/run': File exists Starting advanced IEEE 802.11 management: disabled via /etc/default/hostapd. Starting internet superserver: inetd. Starting AppleTalk services in the background. Starting System status server: rwhod. Starting Samba daemons: nmbdllc: version magic '2.6.16.16-arm1 ARMv5 gcc-4.1' should be '2.6.16.16-arm1 ARMv5 gcc-3.4' modprobe: WARNING: Error inserting llc (/lib/modules/2.6.16.16-arm1/kernel/net/llc/llc.ko): Invalid module format psnap: version magic '2.6.16.16-arm1 ARMv5 gcc-4.1' should be '2.6.16.16-arm1 ARMv5 gcc-3.4' modprobe: WARNING: Error inserting psnap (/lib/modules/2.6.16.16-arm1/kernel/net/802/psnap.ko): Invalid module format appletalk: version magic '2.6.16.16-arm1 ARMv5 gcc-4.1' should be '2.6.16.16-arm1 ARMv5 gcc-3.4' modprobe: FATAL: Error inserting appletalk (/lib/modules/2.6.16.16-arm1/kernel/net/appletalk/appletalk.ko): Invalid module format socket: Address family not supported by protocol llc: version magic '2.6.16.16-arm1 ARMv5 gcc-4.1' should be '2.6.16.16-arm1 ARMv5 gcc-3.4' modprobe: WARNINpsnap: version magic '2.6.16.16-arm1 ARMv5 gcc-4.1' should be '2.6.16.16-arm1 ARMv5 gcc-3.4' G: Error inserting llc (/lib/modappletalk: version magic '2.6.16.16-arm1 ARMv5 gcc-4.1' should be '2.6.16.16-arm1 ARMv5 gcc-3.4' ules/2.6.16.16-arm1/kernel/net/llc/llc.ko): Invalid module format modprobe: WARNING: Error inserting psnap (/lib/modules/2.6.16.16-arm1/kernel/net/802/psnap.ko): Invalid module format modprobe: FATAL: Error inserting appletalk (/lib/modules/2.6.16.16-arm1/kernel/net/appletalk/appletalk.ko): Invalid module format socket: Address family not supported by protocol atalkd: can't get interfaces, exiting. llc: version magic '2.6.16.16-arm1 ARMv5 gcc-4.1' should be '2.6.16.16-arm1 ARMv5 gcc-3.4' modprobe: WARNINpsnap: version magic '2.6.16.16-arm1 ARMv5 gcc-4.1' should be '2.6.16.16-arm1 ARMv5 gcc-3.4' G: Error inserting llc (/lib/modappletalk: version magic '2.6.16.16-arm1 ARMv5 gcc-4.1' should be '2.6.16.16-arm1 ARMv5 gcc-3.4' ules/2.6.16.16-arm1/kernel/net/llc/llc.ko): Invalid module format modprobe: WARNING: Error inserting psnap (/lib/modules/2.6.16.16-arm1/kernel/net/802/psnap.ko): Invalid module format modprobe: FATAL: Error inserting appletalk (/lib/modules/2.6.16.16-arm1/kernel/net/appletalk/appletalk.ko): Invalid module format llc: version magic '2.6.16.16-arm1 ARMv5 gcc-4.1' should be '2.6.16.16-arm1 ARMv5 gcc-3.4' modprobe: WARNINpsnap: version magic '2.6.16.16-arm1 ARMv5 gcc-4.1' should be '2.6.16.16-arm1 ARMv5 gcc-3.4' G: Error inserting llc (/lib/modappletalk: version magic '2.6.16.16-arm1 ARMv5 gcc-4.1' should be '2.6.16.16-arm1 ARMv5 gcc-3.4' ules/2.6.16.16-arm1/kernel/net/llc/llc.ko): Invalid module format modprobe: WARNING: Error inserting psnap (/lib/modules/2.6.16.16-arm1/kernel/net/802/psnap.ko): Invalid module format modprobe: FATAL: Error inserting appletalk (/lib/modules/2.6.16.16-arm1/kernel/net/appletalk/appletalk.ko): Invalid module format papd: can't open lock file, "/var/run/papd.pid" afpd: can't open lock file, "/var/run/afpd.pid" smbd. Starting OpenSLP server: slpd. mkdir: cannot create directory `/var/run/sshd': No such file or directory Starting kernelmon:Starting NTP server: ntpd. Starting Bluetooth subsystem: hcidbluetooth: version magic '2.6.16.16-arm1 ARMv5 gcc-4.1' should be '2.6.16.16-arm1 ARMv5 gcc-3.4' modprobe: FATAL: Error insertingbluetooth: version magic '2.6.16.16-arm1 ARMv5 gcc-4.1' should be '2.6.16.16-arm1 ARMv5 gcc-3.4' bluetooth (/lib/modules/2.6.16.16-arm1/kernel/net/bluetooth/bluetooth.ko): Invalid module format modprobe: FATAL: Error inserting bluetooth (/lib/modules/2.6.16.16-arm1/kernel/net/bluetooth/bluetooth.ko): Invalid module format sdpdbluetooth: version magic '2.6.16.16-arm1 ARMv5 gcc-4.1' should be '2.6.16.16-arm1 ARMv5 gcc-3.4' modprobe: FATAL: Error inserting bluetooth (/lib/modules/2.6.16.16-arm1/kernel/net/bluetooth/bluetooth.ko): Invalid module format Can't open RFCOMM control socket: Address family not supported by protocol rfcommbluetooth: version magic '2.6.16.16-arm1 ARMv5 gcc-4.1' should be '2.6.16.16-arm1 ARMv5 gcc-3.4' modprobe: FATAL: Error inserting bluetooth (/lib/modules/2.6.16.16-arm1/kernel/net/bluetooth/bluetooth.ko): Invalid module format dund. cp: cannot create regular file `/var/tmp/dhcpcstate': No such file or directory updating DHCP lease info: eth0 DHCPCSTATE= mkdir: cannot create directory `/var/run/proftpd': No such file or directory ProFTPd is started from inetd/xinetd. Starting periodic command scheduler: crond/usr/sbin/cron: can't open or create /var/run/crond.pid: No such file or directory failed! /usr/local/sbin/miconapl: /lib/libc.so.6: version `GLIBC_2.4' not found (required by /usr/local/sbin/miconapl) MIntAct mkdir: cannot create directory `/var/run': File exists /usr/local/sbin/miconapl: /lib/libc.so.6: version `GLIBC_2.4' not found (required by /usr/local/sbin/miconapl) MIntAct /usr/local/sbin/miconapl: /lib/libc.so.6: version `GLIBC_2.4' not found (required by /usr/local/sbin/miconapl) touch: cannot touch `/var/tmp/bootcomplete': No such file or directory /etc/rc2.d/S99z01-bootcomplete: line 44: flushqueue: command not found umount: /initrd: not found miconapl: /lib/libc.so.6: version `GLIBC_2.4' not found (required by miconapl) miconapl: /lib/libc.so.6: version `GLIBC_2.4' not found (required by miconapl) /usr/local/sbin/miconapl: /lib/libc.so.6: version `GLIBC_2.4' not found (required by /usr/local/sbin/miconapl) MIntAct /usr/local/sbin/miconapl: /lib/libc.so.6: version `GLIBC_2.4' not found (required by /usr/local/sbin/miconapl) MIntAct /usr/local/sbin/miconapl: /lib/libc.so.6: version `GLIBC_2.4' not found (required by /usr/local/sbin/miconapl) MIntAct BUFFALO INC. LinkStation series LS-GL(IESADA) kuropro login: <<====== こんなところでloginプロンプトが出た /usr/local/sbin/miconapl: /lib/libc.so.6: version `GLIBC_2.4' not found (required by /usr/local/sbin/miconapl) MIntAct /usr/local/sbin/miconapl: /lib/libc.so.6: version `GLIBC_2.4' not found (required by /usr/local/sbin/miconapl) MIntAct /usr/local/sbin/miconapl: /lib/libc.so.6: version `GLIBC_2.4' not found (required by /usr/local/sbin/miconapl) MIntAct Core Driver (ERROR) 0 0: Edma Error Reg 0xa8