KUROPRO login: /sbin/hotplug [block] 77442+1 records in 77442+1 records out ---- rcDown(standbying) ---- ===== shutdown_proc.sh stopping ===== Stop logchkd:done. Stop services: crondStop services: rarpd tftpd rarpcfgd fwupdated. Stop daemonwatch:done. Stop servecies: atalkd afpd killall: papd: no process killed Stop lsprcvd:Stop clientUtil_server:rm: cannot remove `/var/run/clientUtil_server-eth0.pid': No such file or directory Shutting down FTPD services: killall: proftpd: no process killed stop Shutting down HTTPD services: /usr/local/apache/bin/apachectl stop: httpd stopped Stop services: lpd Shutting down SMB services: Shutting down NMB services: Shutting down WINBIND services: killall: winbindd: no process killed Shutting down PAMSMBD services: killall: pamsmbd: no process killed killall: build_sync_period.sh: no process killed killall: chk_mediaserver.sh: no process killed Stop services: pcastd scheduler killall: pcastd: no process killed killall: Scheduler: no process killed killall: mt-daapd: no process killed Stop services: mediaserver 1 killall: mediaserver: no process killed Stop services: EPGd iRCommander Stop services: DirectCopy Deconfiguration network interface: lo eth0 Stop inetd:done. Stop kernelmon:done. Stop errormon:done. Save current configuration files tar: Removing leading `/' from member names tar: Removing leading `/' from member names tar: Removing leading `/' from hard link targets Stop logchkd:killall: logchkd: no process killed done. /sbin/hotplug [module] ERROR: Module p8022 does not exist in /proc/modules /sbin/hotplug [module] /sbin/hotplug [module] [Success] ===== umount_disk.sh stopping ===== killing all servers.. Shutting down SMB services: killall: smbd: no process killed Shutting down NMB services: killall: nmbd: no process killed Shutting down WINBIND services: killall: winbindd: no process killed Shutting down PAMSMBD services: killall: pamsmbd: no process killed Shutting down FTPD services: killall: proftpd: no process killed Stop servecies: atalkd afpd /sbin/hotplug [module] /sbin/hotplug [module] /sbin/hotplug [module] Can't unregister KUROPRO:Workstation@* Can't unregister KUROPRO:netatalk@* killall: atalkd: no process killed killall: afpd: no process killed killall: papd: no process killed killing all daemons Stop daemonwatch:killall: daemonwatch: no process killed done. killall: diskmon: no process killed killall: miconmon: no process killed killall: rsync: no process killed stop Shutting down HTTPD services: /usr/local/apache/bin/apachectl stop: httpd (no pid file) not running killall: httpd: no process killed \n==== unmounting all disks ==== /sbin/hotplug [block] /sbin/hotplug [block] umount2: Invalid argument umount: /mnt/usbdisk1: Illegal seek umount2: Invalid argument umount: /mnt/usbdisk2: not mounted umount: /dev/usbdisk1_1: not found umount: /dev/usbdisk2_1: not found umount: /mnt/ram: device is busy umount: /mnt/ram: device is busy /sbin/hotplug [module] ERROR: Module p8022 does not exist in /proc/modules /sbin/hotplug [module] /sbin/hotplug [module] [Success] ===== start_data_array.sh stopping ===== can't find or execute script(start_data_array.sh) [Failed ] ===== sendsigs.sh stopping ===== swapoff: /dev/ls_disk1_5: Invalid argument Shutting down kernel logger: Shutting down system logger: umount: /mnt/ram: device is busy umount: /mnt/ram: device is busy warning: can't open /etc/mtab: No such file or directory [Success] ** /proc is closed. ----- rcDown Finished. ---- ＞＞＞＞＞ここらからスリープの設定？ RETVAL=1, but anyway go on the resume process. killall: sh: no process killed /sbin/hotplug [block] pwrmgr[31588]: mkdir new pwrmgr dir failed: File exists pwrmgr: mkdir new pwrmgr dir failed: File exists cp: /etc/melco/pcast_PlayDb: omitting directory cp: /etc/melco/scheduler: omitting directory Starting pid 32163, console /dev/ttyS0: '/etc/init.d/rcDown' put nologin create ram-rootfs <<<===== EMモードで始める準備 use /boot/initrd.buffalo <<<=== RAM上のFSとSLASH-MEMORYのカーネルで。 down all processes restart init(1) with no respawn in inittab(5) kills the survived processes remove /etc/nologin unmount some file-systems. and turn off swaps mount new rootfs copy the PC-list and inittab(5) into new rootfs change rootfs restart new rootfs --- rcDown --- killall: chk_pcastd.sh: no process killed ===== exec:shutdown_start.sh ===== grep: /proc/buffalo/firmware: No such file or directory grep: /proc/buffalo/firmware: No such file or directory grep: /proc/buffalo/firmware: No such file or directory grep: /proc/buffalo/firmware: No such file or directory called shutdown_start /etc/init.d/shutdown_start.sh ===== exec:shutdown_proc.sh ===== /etc/init.d/shutdown_proc.sh: line 3: /etc/init.d/logchkd.sh: No such file or directory Stop services: crondkillall: crond: no process killed /etc/init.d/shutdown_proc.sh: line 5: /etc/init.d/ltbootd.sh: No such file or directory Stop daemonwatch:killall: daemonwatch: no process killed done. /etc/init.d/shutdown_proc.sh: line 7: /etc/init.d/atalk.sh: No such file or directory /etc/init.d/shutdown_proc.sh: line 8: /etc/init.d/lsprcvd.sh: No such file or directory grep: /proc/buffalo/firmware: No such file or directory grep: /proc/buffalo/firmware: No such file or directory grep: /proc/buffalo/firmware: No such file or directory grep: /proc/buffalo/firmware: No such file or directory Stop clientUtil_server:Shutting down FTPD services: killall: proftpd: no process killed Stop a service: httpd killall: httpd: no process killed /etc/init.d/shutdown_proc.sh: line 12: /etc/init.d/lprng.sh: No such file or directory /etc/init.d/shutdown_proc.sh: line 13: /etc/init.d/smb.sh: No such file or directory killall: chk_pcastd.sh: no process killed /etc/init.d/shutdown_proc.sh: line 15: /etc/init.d/pcastd.sh: No such file or directory /etc/init.d/shutdown_proc.sh: line 16: /etc/init.d/epg.sh: No such file or directory /etc/init.d/shutdown_proc.sh: line 17: /etc/init.d/directcopy.sh: No such file or directory grep: /proc/buffalo/firmware: No such file or directory grep: /proc/buffalo/firmware: No such file or directory grep: /proc/buffalo/firmware: No such file or directory grep: /proc/buffalo/firmware: No such file or directory cp: unable to open `/var/tmp/dhcpcstate': No such file or directory grep: /proc/mounts: No such file or directory Deconfiguration network interface: lo eth0 touch: /var/run/ifdown: No such file or directory killall: dhcpcd: no process killed /etc/init.d/networking.sh: line 168: /var/tmp/dhcpcstate: No such file or directory /etc/init.d/shutdown_proc.sh: line 19: /etc/init.d/inetd.sh: No such file or directory killall: diskmon: no process killed Stop kernelmon:killall: kernelmon: no process killed killall: cat: no process killed done. err: argCmd: invalid command. (usb_set_power) /etc/init.d/shutdown_proc.sh: line 23: /etc/init.d/errormon.sh: No such file or directory /etc/init.d/shutdown_proc.sh: line 24: /etc/init.d/save_config.sh: No such file or directory /etc/init.d/shutdown_proc.sh: line 25: /etc/init.d/logchkd.sh: No such file or directory ===== exec:umount_disk.sh ===== grep: /proc/buffalo/firmware: No such file or directory grep: /proc/buffalo/firmware: No such file or directory grep: /proc/buffalo/firmware: No such file or directory grep: /proc/buffalo/firmware: No such file or directory killing all servers.. /etc/init.d/umount_disk.sh: line 336: /etc/init.d/smb.sh: No such file or directory Shutting down FTPD services: killall: proftpd: no process killed /etc/init.d/umount_disk.sh: line 338: /etc/init.d/atalk.sh: No such file or directory killing all daemons Stop daemonwatch:killall: daemonwatch: no process killed done. killall: diskmon: no process killed err: argCmd: invalid command. (usb_set_power) killall: rsync: no process killed Stop a service: httpd killall: httpd: no process killed killall: sshd: no process killed \n==== unmounting all disks ==== umount2: No such file or directory umount: /boot: Illegal seek umount2: No such file or directory umount: /mnt/disk1/: Illegal seek umount2: No such file or directory umount: /mnt/usbdisk1: Illegal seek umount2: No such file or directory umount: /mnt/usbdisk2: not found umount: /dev/usbdisk1_1: not found umount: /dev/usbdisk2_1: not found swapoff: /dev/ls_disk1_5: Invalid argument umount: /proc/bus/usb: not found umount: /dev/ram1: not mounted /etc/init.d/umount_disk.sh: line 11: rmmod: command not found /etc/init.d/umount_disk.sh: line 12: rmmod: command not found /etc/init.d/umount_disk.sh: line 13: rmmod: command not found /etc/init.d/umount_disk.sh: line 14: rmmod: command not found ===== exec:sendsigs.sh ===== grep: /proc/buffalo/firmware: No such file or directory grep: /proc/buffalo/firmware: No such file or directory grep: /proc/buffalo/firmware: No such file or directory grep: /proc/buffalo/firmware: No such file or directory swapoff: /dev/ls_disk1_5: Invalid argument Shutting down kernel logger: killall: klogd: no process killed Shutting down system logger: killall: syslogd: no process killed umount: /mnt/ram: not found umount: /sys: not mounted umount: /proc: not mounted Starting pid 32314, console /dev/ttyS0: '/bin/umount' The system is going down NOW !! Sending SIGTERM to all processes. Sending SIGKILL to all processes. init started: BusyBox v1.1.1 (2008.03.07-05:17+0000) multi-call binary 　　　↑↑↑↑ init を起動 Starting pid 32319, console /dev/ttyS0: '/bin/umount' Starting pid 32322, console /dev/ttyS0: '/bin/umount' Starting pid 32326, console /dev/ttyS0: '/bin/mount' Starting pid 32329, console /dev/ttyS0: '/etc/init.d/standby.rcS' --- rcStart (initrd standby mode) --- ===== exec:create_devlink.sh ===== /etc/init.d/create_devlink.sh: line 675: /var/tmp/devlink: No such file or directory /etc/init.d/create_devlink.sh: line 675: /var/tmp/devlink: No such file or directory ===== exec:sethostname.sh ===== configure files from Buffalo parameters. ===== exec:restore_config.sh ===== mount: mount point /boot does not exist Update configuration files ** fail. not fount initfile.tar.gz ===== exec:networking.sh ===== cp: unable to open `/var/tmp/dhcpcstate': No such file or directory create network files.. IP=[dhcp], netmask=[], dgw=[], dns1=[], dns2=[] /etc/init.d/networking.sh: line 36: /var/tmp/dhcpcstate: No such file or directory killall: dhcpcd: no process killed route: SIOC[ADD|DEL]RT: No such process Configuration network interface: lo eth0 /etc/init.d/networking.sh: line 125: /var/tmp/dhcpcstate: No such file or directory requesting DHCP tout=30[s] networking.sh: dhcp requesting... DontDownIface alwaysFork eth0: link down eth0: link up<5>, full duplex<5>, speed 1 Gbps<5> sendto: count 6 sync 1 sendto: count 5 sync 0 sendto: count 6 sync 0 ** dhcp fail dhcpcd.exe: interface eth0 has been configured with new IP=192.168.0.27 GATEWAY=192.168.0.4 /etc/dhcpc/dhcpcd.exe: line 64: /var/tmp/dhcpcstate: No such file or directory ** networking.sh dhcp fin. configure files from Buffalo parameters. ===== exec:create_usblink.sh ===== ===== exec:closeSysMd.sh ===== /etc/init.d/standby.rcS: line 9: /etc/init.d/closeSysMd.sh: No such file or directory ===== exec:miconmon.sh ===== Core Driver (ERROR) 0 0: Edma Error Reg 0xa8 Core Driver (ERROR) 0 0: Flush DMA, type=CALLBACK, commands 0 (on EDMA 0) err: argCmd: invalid command. (usb_set_power) ===== exec:kernelmon.sh ===== Starting kernelmon:===== exec:clientUtil_servd.sh ===== Starting clientUtil_server:starting on eth0 touch: /var/run/active_clientUtil_server: No such file or directory ===== exec:cron.sh ===== Start services: crondcrond[32509]: crond 2.3.2 dillon, started, log level 8 ===== exec:httpd.sh ===== Start a service: httpd ===== exec:backupmon ===== Start service: backupmon ===== exec:powersw.sh ===== Start service: powerswmon Starting pid 32521, console /dev/ttyS0: '/sbin/getty' HS-DHGL-EM2D6 login: DHCPCSTATE= ＞＞＞＞スリープとはじつはEMモードで動いていること。 ＞＞＞＞実際には動いてるからcrondの記録が。。。 crond[32509]: USER root pid 13884 cmd /usr/local/sbin/PowerSave.sh resume-cron ############################################################################ ######　起動時刻　になった################################################## ############################################################################ eth0: link down Core Driver (ERROR) 0 0: Edma Error Reg 0x10 eth0: link up<5>, full duplex<5>, speed 1 Gbps<5> ** BUFFALO Disable Command Queuing Function [0 0] ** Linux IAL (ERROR) : retry command host=0, bus=0 SCpnt = c147b1a0 XFS mounting filesystem sda2 The system is going down NOW !! Sending SIGTERM to all processes. Sending SIGKILL to all processes. init started: BusyBox v1.1.1 (2008.03.07-05:17+0000) multi-call binary 　　　↑↑↑↑ init を起動 Starting pid 14288, console /dev/ttyS0: '/etc/init.d/rcS' --- rcStart (hddroot) --- mkdir: Cannot create directory `/sys': File exists Mon Feb 2 10:45:18 JST 2009 ** step1 ** ===== exec:checkroot.sh ===== mount: /dev/pts already mounted or /dev/pts busy mount: according to mtab, devpts is already mounted on /dev/pts mkdir: Cannot create directory `/var/lock': File exists ln: /var/spool/cron/cron: File exists rm: /var/lock/perfmon: is a directory rm: /var/lock/printing: is a directory rm: /var/lock/subsys: is a directory Adding 1004020k swap on /dev/ls_disk1_5. Priority:-3 extents:1 across:1004020k ===== exec:create_devlink.sh ===== ===== exec:procps.sh ===== ===== exec:devpts.sh ===== ===== exec:sethostname.sh ===== configure files from Buffalo parameters. ===== exec:restore_config.sh ===== kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. /sbin/hotplug [block] Update configuration files Restore previous configuration files /etc/init.d/restore_config.sh: line 398: [: missing `]' ===== exec:exp_firm_nvram.sh ===== not expansion firmware ** step2 ** ===== exec:networking.sh ===== create network files.. IP=[dhcp], netmask=[], dgw=[], dns1=[], dns2=[] killall: dhcpcd: no process killed route: SIOC[ADD|DEL]RT: No such process Configuration network interface: lo eth0 requesting DHCP tout=30[s] networking.sh: dhcp requesting... DontDownIface alwaysFork sendto: count 6 sync 0 dhcpcd.exe: interface eth0 has been configured with old IP=192.168.0.27 GATEWAY=192.168.0.4 ** networking.sh dhcp fin. configure files from Buffalo parameters. ===== exec:syslog.sh ===== Starting system logger: optarg:syslog LoadConfFileString:key=[local_auth] not found in /etc/melco/info. load_info ItemValue = off LoadConfFileString:key=[ad_dns] not found in /etc/melco/info. LoadConfFileOnOff:key=[info_visible] not found in /etc/melco/info. Starting kernel logger: ===== exec:inetd.sh ===== Starting inetd:===== exec:kernelmon.sh ===== Starting kernelmon:/usr/local/sbin/kernelmon: line 10: /usr/local/bin/kernelmon_exec.sh: No such file or directory ===== exec:miconmon.sh ===== err: argCmd: invalid command. (usb_set_power) miconmon 1.00b3 started (Builddate Feb 13 2007 19:24:56) ===== exec:mount_share.sh ===== /etc/init.d/mount_share.sh: line 482: [: -eq: unary operator expected XFS mounting filesystem sda6 /sbin/hotplug [block] share mkdir: Cannot create directory `/mnt/disk1//spool': File exists mkdir: Cannot create directory `/mnt/disk1//spool/lp': File exists mkdir: Cannot create directory `/mnt/disk1//spool/samba': File exists mkdir: Cannot create directory `/mnt/disk1//spool/mac': File exists ===== exec:diskmon.sh ===== diskmon ver.1.01 f_type=0x58465342 total_size=127931052032 free_byes=126314561536 ===== exec:errormon.sh ===== Starting errormon:errormon ver.1.00b5(BuildDate Sep 11 2008 17:51:22) Started ===== exec:hotplug.sh ===== ls: /proc/scsi/usb-storage/: No such file or directory ===== exec:ups ===== ** step3 ** ===== exec:recover_shareinfo.sh ===== find: /mnt/array1: No such file or directory find: /mnt/array2: No such file or directory ** share disk1 ** spool disk1 ** mt-daapd disk1 ** mediaserver disk1 find: /mnt/disk2: No such file or directory find: /mnt/disk3: No such file or directory find: /mnt/disk4: No such file or directory ===== exec:micon_setup.sh ===== ===== exec:atalk.sh ===== Starting AppleTalk services: configure atalkd atalk_name=KUROPRO optarg:atalk LoadConfFileString:key=[local_auth] not found in /etc/melco/info. load_info ItemValue = off LoadConfFileString:key=[ad_dns] not found in /etc/melco/info. LoadConfFileOnOff:key=[info_visible] not found in /etc/melco/info. file:/etc/atalk/AppleVolumes.default file:/etc/pam.d/netatalk file:/etc/atalk/afpd.conf (backgrounded) ===== exec:ftpd.sh ===== ftp is OFF ===== exec:httpd.sh ===== /sbin/hotplug [module] /sbin/hotplug [module] /sbin/hotplug [module] start Starting HTTPD services: /usr/local/apache/bin/apachectl start: httpd started ===== exec:lprng.sh ===== Start services: lpd ===== exec:smb.sh ===== configure samba optarg:samba LoadConfFileString:key=[local_auth] not found in /etc/melco/info. load_info ItemValue = off LoadConfFileString:key=[ad_dns] not found in /etc/melco/info. LoadConfFileOnOff:key=[info_visible] not found in /etc/melco/info. LoadConfFileString:key=[msdfs_function] not found in /etc/melco/msdfs. LoadConfFileString:key=[msdfs_root_as_link] not found in /etc/melco/msdfs. LoadConfFileString:key=[msdfs_root_name] not found in /etc/melco/msdfs. LoadConfFileString:key=[msdfs_root_path] not found in /etc/melco/msdfs. LoadConfFileString:key=[msdfs_link1_name] not found in /etc/melco/msdfs. Can't Open : /etc/melco/offlinefile file:/etc/samba/smb.conf >IconvCodeCharset CodePage=0,charset=CP932 file:/etc/pam_smb.conf Starting SMB services: Starting NMB services: ===== exec:epg.sh ===== Start services: EPGd iRCommander EPGd : version 1.1.0 0.2.0 ===== exec:directcopy.sh ===== Start services: DirectCopy ===== exec:clientUtil_servd.sh ===== Starting clientUtil_server:starting on eth0 ===== exec:lsprcvd.sh ===== Starting lsprcvd:===== exec:daemonwatch.sh ===== Starting daemonwatch:daemonwatch Ver.1.01 watch list file : /etc/daemonwatch.list ===== exec:cron.sh ===== Start services: crond===== exec:ltbootd.sh ===== Starting services: rarpd tftpd rarpcfgd fwupdated. ===== exec:logchkd.sh ===== Starting logchkd:logchkd ver.1.12(Sep 11 2008) started ===== exec:checkconfig.sh ===== ===== exec:init_sem.sh ===== insmod: error inserting '/lib/modules/usblp.ko': -1 File exists ===== exec:bootcomplete.sh ===== /etc/init.d/bootcomplete.sh: line 44: flushqueue: command not found ** step4 Extra Step KAMII ** ===== exec:telnetd.sh ===== configure telnetd optarg:proftpd LoadConfFileString:key=[local_auth] not found in /etc/melco/info. load_info ItemValue = off LoadConfFileString:key=[ad_dns] not found in /etc/melco/info. LoadConfFileOnOff:key=[info_visible] not found in /etc/melco/info. LoadConfFileString:key=[msdfs_function] not found in /etc/melco/msdfs. LoadConfFileString:key=[msdfs_root_as_link] not found in /etc/melco/msdfs. LoadConfFileString:key=[msdfs_root_name] not found in /etc/melco/msdfs. LoadConfFileString:key=[msdfs_root_path] not found in /etc/melco/msdfs. LoadConfFileString:key=[msdfs_link1_name] not found in /etc/melco/msdfs. file:/etc/proftpd/proftpd.conf >IconvCodeCharset CodePage=0,charset=CP932 LoadConfFileInt:key=[BUFFALO_CONFIG_SSLFTP] not found in /etc/buffalo_expansion_firmware. file:/etc/pam.d/ftp Starting TELNETD services: ===== exec:sshd.sh ===== Starting sshd: Starting pid 15017, console /dev/ttyS0: '/sbin/getty' BUFFALO INC. LinkStation series HS-DHGL(JINMU) KUROPRO login: