Script started on Tue Feb 3 11:04:16 2009 bash-3.2$ cu -l '/dev/cu.I-O DATA USB-RSAQ5' -s 115200 Connected. ＞＞＞シャットダウン／リブートの開始 INIT: Switching to runINIT: Sending processes the TERM signal Stopping web server (apache2)...apache2: Could not reliably determine the server's fully qualified domain name, using 192.168.0.29 for ServerName . Stopping periodic command scheduler: crond. Stopping Samba daemons: nmbd smbd. Stopping bluemon: bluemon. Stopping Common Unix Printing System: cupsd. Stopping system message bus: dbus. Stopping MTA: exim4_listener. Stopping advanced IEEE 802.11 management: hostapd. Stopping internet superserver: inetd. Stopping AppleTalk Daemons: afpd papd timelord atalkd cnid_metad. Stopping System status server: rwhod. Stopping OpenSLP server: slpd. Stopping OpenBSD Secure Shell server: sshd. Stopping NTP server: ntpd. Saving the system clock.. ProFTPd warning: cannot start neither in standalone nor in inetd/xinetd mode. Check your configuration. Stopping Bluetooth subsystem: pand dund rfcomm hidd sdpd hcid. Stopping domain name service...: bindrndc: connect failed: 127.0.0.1#953: connection refused failed! Stopping kernel log daemon: klogd. Stopping system log daemon: syslogd. Asking all remaining processes to terminate...done. Killing all remaining processes...done. Deconfiguring network interfaces...There is already a pid file /var/run/dhclient.eth0.pid with pid 652 removed stale PID file Internet Systems Consortium DHCP Client V3.0.4 Copyright 2004-2006 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ Listening on LPF/eth0/00:16:01:f5:4f:e4 Sending on LPF/eth0/00:16:01:f5:4f:e4 Sending on Socket/fallback DHCPRELEASE on eth0 to 192.168.254.254 port 67 done. Cleaning up ifupdown.... Deactivating swap...done. Unmounting local filesystems...done. Will now restart. ＞＞＞ここからリスタートかな Synchronizing SCSI cache for disk sda: Restarting system. . >miconCntl_Reboot >miconCntl_ShutdownWait Orion1 CPU = Low === BUFFALO LS-GL U-Boot. === ** LOADER ** ** BUFFALO BOARD: BUFFALO_BOARD_LS_GL LE (CFG_ENV_ADDR=fffff000) U-Boot 1.1.1 (Apr 18 2007 - 18:35:44) Marvell version: 1.12.1 - TINY DRAM CS[0] base 0x00000000 size 128MB DRAM Total size 128MB [256kB@fffc0000] [0kB@f8000000] ## Unknown FLASH at f8000000: Size = 0x00000000 = 0 MB Flash: 256 kB Addresses 20M - 0M are saved for the U-Boot usage. Mem malloc Initialization (20M - 16M): Done Soc: 88F5182 A2 CPU: ARM926 (Rev 0) running @ 400Mhz Orion 1 streaming disabled SysClock = 200Mhz , TClock = 166Mhz USB 0: host mode USB 1: host mode PCI 0: PCI Express Root Complex Interface PCI 1: Conventional PCI, speed = 33000000 Net: egiga0 [PRIME] Using 88E1118 phy Marvell Serial ATA Adapter Integrated Sata device found Device 0: OK Model: WDC WD1600AAJS-00PSA0 Firm: 05.06H05 Ser#: WD-WCAP9A669853 Type: Hard Disk Supports 48-bit addressing Capacity: 152627.8 MB = 149.0 GB (312581808 x 512) Using device ide0, partition 1 Loading from block device ide device 0, partition 1: Name: hda1 Type: U-Boot File:/initrd.buffalo 4883837 bytes read Using device ide1, partition 1 ** Bad partition 1 ** Booting from Device 0 hit any key to switch tftp boot. Hit any key to stop autoboot: 2  1  0 Hit any key to stop autoboot: 3  2  1  0 Reset IDE: Marvell Serial ATA Adapter Integrated Sata device found Device 0: OK Model: WDC WD1600AAJS-00PSA0 Firm: 05.06H05 Ser#: WD-WCAP9A669853 Type: Hard Disk Supports 48-bit addressing Capacity: 152627.8 MB = 149.0 GB (312581808 x 512) Using device ide0, partition 1 Loading from block device ide device 0, partition 1: Name: hda1 Type: U-Boot File:/uImage.buffalo 1891040 bytes read Using device ide1, partition 1 ** Bad partition 1 ** <> ## Booting image at 00100000 ... Image Name: Linux-2.6.16.16-arm1 Created: 2009-01-12 6:07:45 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1890976 Bytes = 1.8 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK ## Loading Ramdisk Image at 00800000 ... Image Name: initrd Created: 2009-01-01 9:50:49 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 4883773 Bytes = 4.7 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Starting kernel ... arg:console=ttyS0,115200 root=/dev/sda2 rw initrd=0x00800040,15M panic=5 BOOTVER=1.10 CONFIG_BUFFALO_PLATFORM CONFIG_BUFFALO_LINKSTATION_LSGL --- Uncompressing Linux.......................................................................................................................... done, booting the kernel. Linux version 2.6.16.16-arm1 (root@lsgl) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #5 Mon Jan 12 15:06:46 JST 2009 CPU: ARM926EJ-Sid(wb) [41069260] revision 0 (ARMv5TEJ) Machine: MV-88fxx81 Using UBoot passing parameters structure Sys Clk = 200000000, Tclk = 166664740 - Warning - This LSP release was tested only with U-Boot release 1.7.3 Memory policy: ECC disabled, Data cache writeback CPU0: D VIVT write-back cache CPU0: I cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets CPU0: D cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets Built 1 zonelists Kernel command line: console=ttyS0,115200 root=/dev/sda2 rw initrd=0x00800040,15M panic=5 BOOTVER=1.10 PID hash table entries: 1024 (order: 10, 16384 bytes) Console: colour dummy device 80x30 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 128MB 0MB 0MB 0MB = 128MB total Memory: 110392KB available (3237K code, 539K data, 104K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 15360K NET: Registered protocol family 16 FLASH boardId = 12 Flash bankwidth 1, base ff800000, size 400000 BUFFALO LS_GL FLASH size 4096[KB] Marvell Development Board (LSP Version 1.7.8_NAS)-- BUFFALO_BOARD_LS_GL Detected Tclk 166664740 and SysClk 200000000 Marvell USB EHCI Host controller #0: c16f5e00 Marvell USB EHCI Host controller #1: c16f5c00 pexBarOverlapDetect: winNum 2 overlap current 0 mvPexInit:Warning :Bar 2 size is illigal it will be disabled please check Pex and CPU windows configuration PCI: bus0: Fast back to back transfers enabled PCI: bus1: Fast back to back transfers enabled SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub use IDMA acceleration in copy to/from user buffers. used channels 2 and 3 Done. cesadev_init(c00112bc) mvCesaInit: sessions=640, queue=32, pSram=f0000000 Fast Floating Point Emulator V0.9 (c) Peter Teichmann. Installing knfsd (copyright (C) 1996 okir@monad.swb.de). SGI XFS with large block numbers, no debug enabled Initializing Cryptographic API io scheduler noop registered (default) io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at MMIO 0x0 (irq = 3) is a 16550A serial8250: ttyS1 at MMIO 0x0 (irq = 4) is a 16550A RAMDISK driver initialized: 3 RAM disks of 16384K size 1024 blocksize loop: loaded (max 8 devices) Marvell Gigabit Ethernet Driver 'egiga': o Ethernet descriptors in DRAM o DRAM SW cache-coherency o Checksum offload enabled o Loading network interface ** egiga_init_module (0) 'eth0' Intergrated Sata device found scsi0 : Marvell SCSI to SATA adapter scsi1 : Marvell SCSI to SATA adapter ** BUFFALO Disable Command Queuing Function [0 0] ** Vendor: Model: WD1600AAJS-00PSA Rev: 05.0 Type: Direct-Access ANSI SCSI revision: 03 Linux IAL (ERROR) : retry command host=0, bus=0 SCpnt = c149cba0 SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: Write Protect is off SCSI device sda: drive cache: write back SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: Write Protect is off SCSI device sda: drive cache: write back sda: sda1 sda2 sda4 < sda5 sda6 > sd 0:0:0:0: Attached scsi disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 physmap flash device: 400000 at ff800000 Found: SST 39LF020 phys_mapped_flash: Found 1 x8 devices at 0x0 in 8-bit bank number of JEDEC chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. cmdlinepart partition parsing not available RedBoot partition parsing not available ehci_platform ehci_platform.4523: EHCI Platform Host Controller ehci_platform ehci_platform.4523: new USB bus registered, assigned bus number 1 ehci_platform ehci_platform.4523: irq 17, io mem 0x00000000 ehci_platform ehci_platform.4523: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: Product: EHCI Platform Host Controller usb usb1: Manufacturer: Linux 2.6.16.16-arm1 ehci_hcd usb usb1: SerialNumber: ehci_platform.4523 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected ehci_platform ehci_platform.16781: EHCI Platform Host Controller ehci_platform ehci_platform.16781: new USB bus registered, assigned bus number 2 ehci_platform ehci_platform.16781: irq 12, io mem 0x00000000 ehci_platform ehci_platform.16781: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: Product: EHCI Platform Host Controller usb usb2: Manufacturer: Linux 2.6.16.16-arm1 ehci_hcd usb usb2: SerialNumber: ehci_platform.16781 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected USB Universal Host Controller Interface driver v2.3 usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice Kernel event proc (C) BUFFALO INC. V.1.00 installed. MICON ctrl (C) BUFFALO INC. V.1.00 installed. MICON V2 (C) BUFFALO INC. V.1.00 installed. NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 3, 32768 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). ---- in modified linuxrc (KAMII) --- Tue Feb 3 11:06:21 JST 2009 err: >AnalyzeRecvPacket:This is invalid RespCode.(code=244) CheckDevices linuxrc:choose operation (timeout 4[s]) 1:RamRoot other:HddRoot ? -HddRoot- kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. XFS mounting filesystem sda2 PRODUCTID=0x00000009 PRODUCTID=0x00000009 KERNEL:2009/1/12 14:52:0 HDD:2008/5/20 10:2:41 KERNEL:2008/5/20 10:2:20 HDD:2008/5/20 10:2:41 ***(WARN) hddSys is old. *** -- CopyFromInitrdToHdd -- == fsck_disks == e2fsck 1.27 (8-Mar-2002) Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information /dev/ls_disk1_1: 42/74296 files (31.0% non-contiguous), 145157/297171 blocks 4+0 records in 4+0 records out XFS mounting filesystem sda2 Phase 1 - find and verify superblock... Phase 2 - using internal log - zero log... - scan filesystem freespace and inode maps... - found root inode chunk Phase 3 - for each AG... - scan and clear agi unlinked lists... - process known inodes and perform inode discovery... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - agno = 4 - agno = 5 - agno = 6 - agno = 7 - agno = 8 - agno = 9 - agno = 10 - agno = 11 - agno = 12 - agno = 13 - agno = 14 - agno = 15 - agno = 16 - agno = 17 - agno = 18 - agno = 19 - agno = 20 - agno = 21 - agno = 22 - agno = 23 - agno = 24 - agno = 25 - agno = 26 - agno = 27 - process newly discovered inodes... Phase 4 - check for duplicate blocks... - setting up duplicate extent list... - clear lost+found (if it exists) ... - clearing existing "lost+found" inode - marking entry "lost+found" to be deleted - check for inodes claiming duplicate blocks... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - agno = 4 - agno = 5 - agno = 6 - agno = 7 - agno = 8 - agno = 9 - agno = 10 - agno = 11 - agno = 12 - agno = 13 - agno = 14 - agno = 15 - agno = 16 - agno = 17 - agno = 18 - agno = 19 - agno = 20 - agno = 21 - agno = 22 - agno = 23 - agno = 24 - agno = 25 - agno = 26 - agno = 27 Phase 5 - rebuild AG headers and trees... - reset superblock... Phase 6 - check inode connectivity... - resetting contents of realtime bitmap and summary inodes - ensuring existence of lost+found directory - traversing filesystem starting at / ... rebuilding directory inode 128 - traversal finished ... - traversing all unattached subtrees ... - traversals finished ... - moving disconnected inodes to lost+found ... Phase 7 - verify and correct link counts... done proc /proc proc rw 0 0 sysfs /sys sysfs rw 0 0 XFS mounting filesystem sda2 VFS: Mounted root (xfs filesystem). Trying to move old root to /initrd ... okay Freeing init memory: 104K INIT: version 2.86 booting Activating swap...Adding 1004020k swap on /dev/sda5. Priority:-1 extents:1 across:1004020k done. Checking root file system...fsck 1.40-WIP (14-Nov-2006) /sbin/fsck.xfs: XFS file system. done. Setting the system clock.. Cleaning up ifupdown.... Loading kernel modules...done. Loading device-mapper support. Checking file systems...fsck 1.40-WIP (14-Nov-2006) /dev/sda1: clean, 42/74296 files, 145157/297171 blocks /sbin/fsck.xfs: XFS file system. done. Setting kernel variables...done. Mounting local filesystems...kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. XFS mounting filesystem sda6 done. Activating swapfile swap...done. Setting up networking.... Starting hotplug subsystem: pci cat: /sys/bus/pci/devices/*/class: No such file or directory cat: /sys/bus/pci/devices/*/vendor: No such file or directory cat: /sys/bus/pci/devices/*/device: No such file or directory cat: /sys/bus/pci/devices/*/subsystem_vendor: No such file or directory cat: /sys/bus/pci/devices/*/subsystem_device: No such file or directory Bad PCI agent invocation pci [success] usb usb [success] isapnp isapnp [success] ide ide [success] input input [success] scsi sd_mod: can't be loaded (for disk) scsi [success] done. Configuring network interfaces...Internet Systems Consortium DHCP Client V3.0.4 Copyright 2004-2006 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ eth0: link down Listening on LPF/eth0/00:16:01:f5:4f:e4 Sending on LPF/eth0/00:16:01:f5:4f:e4 Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 eth0: link up<5>, full duplex<5>, speed 1 Gbps<5> DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 DHCPOFFER from 192.168.254.254 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPACK from 192.168.254.254 bound to 192.168.0.29 -- renewal in 245 seconds. done. Starting portmap daemon.... INIT: Entering runlevel: 2 Starting system log daemon: syslogd. Starting kernel log daemon: klogd. Starting portmap daemon...Already running.. Starting bluemon: disabled in /etc/default/bluemon Starting system message bus: dbus. Starting MTA: exim4. Starting internet superserver: inetd. Starting AppleTalk services in the background. Starting Samba daemons: nmbdNET: Registered protocol family 5 smbd. Starting OpenBSD Secure Shell server: sshd. Starting kernelmon:Starting NTP server: ntpd. Starting Bluetooth subsystem: hcidBluetooth: Core ver 2.8 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized sdpdBluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.7 rfcomm dund. Starting periodic command scheduler: crond. Enabling additional executable binary formats: binfmt-supportFATAL: Module binfmt_misc not found. update-binfmts: warning: Couldn't load the binfmt_misc module. . Starting web server (apache2)...apache2: Could not reliably determine the server's fully qualified domain name, using 192.168.0.29 for ServerName . flushqueue Starting rd-landiskd: Debian GNU/Linux 4.0 lsgl ttyS0 lsgl login: ~. Disconnected. bash-3.2$ exit exit Script done on Tue Feb 3 11:11:08 2009